impact value for 34crnimo6 at 20

impact value for 34crnimo6 at 20

impact value for 34crnimo6 at 20 suppliers, distributors, production and supply of impact value for 34crnimo6 at 20, are committed to providing high-quality products, as well as excellent cutting, forming, drilling and other processing services. If you have any needs, please feel free to contact:

[email protected]


impact value for 34crnimo6 at 20

at 20°C in W/(m K) 42.6 Specific heat capacity at 20°C in J/(kg K) 470 Thermal expansion coefficient in soft annealed condition in 10-6K-1 » 20°C - 100°C » 20°C - 200°C » 20°C - 300°C » 20°C - 400°C 11.1 12.1 12.9 13.5 19/12/2018 2018-0017 Page 01 STANDARDS AND DESIGNATIONS DIN EN 10083-3 1.6582 34CrNiMo6 DIN EN 10263-4 1.6582 34CrNiMo6 / 1.6582 Steel - Waldun Steel34CrNiMo6 / 1.6582 Steel is a heat treatable, low alloy steel,used for a wide range of engineering parts. It is capable of being heat treated to produce a typical tensile strength of 1000 -1200 N/mm² which combined with good ductility and resistance to shock. It also has good hardenability,enabling it to be used for medium tensile strengths in fairly large sections, and attain good wear resistance,good impact 34CrNiMo6 - Ovako34CrNiMo6 is a quenching and tempering steel with high strength, high toughness and good hardenability. Used for large axles, machine components, tools and high strength fasteners. The steel can be induction hardened and it is weldable under certain conditions. Through hardenability to appr. 100 mm diameter bar with oil quenching. 356Q - IQ Thermomechanical processing of 34CrNiMo6 steel for Large Nov 05, 2014 · Abstract. This work simulated the thermo-mechanical processing of large-scale forging product made of 34CrNiMo6 steel to evaluate the effect of different processing condition parameters and cooling rates on the variation of microstructure and the final mechanical properties. Through this investigation we tried to achieve the required mechanical properties for deep sea applications, which were a minimum Charpy impact value of 38J at temperature of -20 34CrNiMo6 / 1.6582 - SteelNumber - Chemical composition

Turning and Milling [5 Sets]

Turning-and-Milling
Technical Data Wuzhong Double Column Wuzhong Double Column Schess
Height 5000mm 6000mm 6500mm 3000mm
Load Bearing 160t 400t 600t 50t
Table Diameter Φ7200mm Φ10000mm Φ10000mm Φ3500mm
Max. machining Diameter Φ8000mm Φ12500mm Φ22000mm Φ4000mm
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 5-Axis Simultaneous Motion

Multi-Drilling Machine [32Sets]

Multi-Drilling Machine
Technical Parameters INNSE Italy Shenyang Machine Tool GDC60130MD, GDC3070MD DAE-YANG South Korea
X-axis, Y-axis, Z-axis 8000 4500 1000mm 13000 6000 500mm 7000 3000 500mm 6000 6000 800mm
Boring Diameter ≤Φ120mm ≤Φ100mm ≤Φ100mm Φ2 -Φ 100mm
Processing Depth ≤420mm ≤300mm ≤200mm ≤400mm

For more information, please contact:
[email protected]

Vertical Lathe [10 Sets]

Vertical Lathe
Technical Data Wuzhong Wuzhong Qizhong Qizhong Qizhong
Table Diameter Φl600mm Φ3150mm Φ3600mm Φ4000mm Φ4000mm
Max. Machining Diameter Φ2000mm Φ3500mm Φ4000mm Φ5000mm Φ5000mm
Height 1600mm 2500mm 2000mm 2500mm 4000mm
Load Bearing 5t 40t 32t 50t 50t

Floor-type Milling-boring Machine [11 Sets]

Floor-type Milling-boring Machine
Technical Data Wuzhong Wuzhong Pama
X axis
Y axis
(Z+W) axis
12000
4000
(800+800) mm
16000
5000
(1200*1200)mm
12000
3000
(1200+1000)mm
Table Size 3000*3000mm 4000*4000mm 3600*4000mm
Load Bearing 60t 100t 65t
Boring Bar Dia Φ160mm Φ200mm Φ160mm

Technical Data Pama INNSE260 INNSE280
X axis
Y axis
(Z+W) axis
20000
5000
(1200+1000)mm
17500
6000
(1400+1600)mm
25700
8000
(1800+2000)mm
Table Size 4000*4000mm 3500mm*5000mm 5000mm*9000mm
Load Bearing 100t 100t 250t
Boring Bar Dia Φ180mm Φ260mm Φ280mm

For more information, please contact:
[email protected]

Portal-type Processing Center [16 Sets]

Portal-type Processing Center
Technical Data Schess, German Okuma, Japan Wuzhong Double Column Youjia(FV4224E) Youjia(FV3215)
Height 7000mm 1850mm 3000/1750mm 5000/2000mm 1170mm 970mm
Width between Columns 8000mm 3050mm 4300mm 6000mm 2400mm 1600mm
Length 50000mm 5000mm 20000mm 28000mm 4200mm 3200mm
Table Size 8000*40000mm 2500*4800mm 3000*26000mm 5000*30000mm 2000*4000mm 1400*3000mm
Rotary table Diameter Φ6000mm —— ——
Simultaneous 7-5 Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion
Technical Data Mitsubishi I II III, Japan
Height 1950mm 1950mm 2550mm
Width between Columns 4250mm 4250mm 3800mm
Length 10200mm 8200mm 6200mm
Table Size 3500*10000mm 3500*8000mm 3000*6000mm
Rotary table Diameter
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion

Deep-Hole Drilling Machine [11 Sets]

Deep-Hole Drilling Machine
Technical Parameters INNSE Italy DAE-YANG South Korea
X-axis, Y-axis, Z-axis 6000 4500 1100mm 4000 3000 1000mm
Boring Diameter ≤Φ60mm Φ16-Φ80mm
Processing Depth ≤1000mm ≤1000mm

For more information, please contact:
[email protected]

Contact us